TCI Module Flame Sensing Advantages

• Less impact of wind & rain

• Thermocouple heat sensing vs the conventional EI modules using flame rectification with an electrical

current (uA) sensor

• Dramatically reduced “nuisance” flame drop out

• Very resistant to wind due to increased drop out time—minimum 30x’s longer

• Better performance in moisture—no sensor current to ground out

• High elevation (low oxygen) applications—more stable due to NO flame rectification

TCI Module Hot Wire Ignition (HWI) Advantages

• Hot Wire Ignition vs the spark or hot surface ignition in the conventional EI modules

• Performs well in harsh and wet climates

• Very resistant to contamination and corrosion

• Low voltage—no high voltage to arc from moisture or insulation breakdown

• Improved integrity—less prone to damage than hot surface ignition

Fire Pit Kits– Drop-In Remote Electronic Ignition These are the top of the line, heavy duty, stainless steel fire pits that allows either wall switch control or handheld remote. They come completely assembled– INDICATE NATURAL GAS or LP and SIZE below.

Bowl Type Pan

13" Fire Pit Contains: 13" I.D. stainless steel bowl pan (2 3/8" deep), stainless steel fire ring, stainless steel
valve box with hot surface ignition system, remote control, vinyl fire pit cover, and lava rock
(to put in pan). Completely assembled. Ready to drop into a customer provided enclosure.

19" Fire Pit Same as above, but with 19” ID bowl.
Your choice of 90K or 150K BTU system.

25"Fire Pit Contains: 25" I.D. stainless steel bowl pan (2 3/8" deep), stainless steel fire ring, stainless steel
valve box with hot surface ignition system, remote control, vinyl fire pit cover, and lava
rock (to put in pan). Completely assembled. Ready to drop into customer provided
enclosure.
Your choice of 150K or 300K, BTU systems

31"Fire Pit Same as above, but with 31" I.D. bowl.

37"Fire Pit Same as above, but with 37" I.D. bowl

Flat Round Type Pan

18" Fire Pit

Contains: 18" flat round stainless steel pan, 12” stainless steel fire ring, stainless
steel valve box with hot surface ignition system, remote control, vinyl fire pit cover,
and lava rock (to put in pan). Completely assembled. Ready to drop into a customer
provided enclosure.
Your choice of 90k or 150k BTU system.

 24" Fire Pit

Same as above with a 24" flat pan, 18" ring

30" Fire Pit

Contains: 30" flat pan, 24" stainless steel ring
Your choice of 150k or 300k BTU system.

36" Fire Pit

Same as above with a 36" flat pan, 30" ring

42" Fire Pit

Same as above with a 42" flat pan, 36" ring

Flat Square Type Pan

Same design as flat round kits above however uses flat, square pans and square fire rings.

18"x15" Fire Pit 18”x15” pan, 12" x 9" fire ring,
24"x 21" Fire Pit 24”x21” pan, 18" x 15" fire ring 
30" x 27" Fire Pit 30”x27” pan, 24" x 21" fire ring.