NEW "Dancing FireGlass" - A Complete Kit to Convert Your Fireplace to the NEW 3D Style

For Natural Gas - LP (Propane) conversion kits available

INCLUDES:   'H' powder coated burner with integrated safety gas pan, yellow stainless steel connector tube, damper clamp - all required by new building codes, 1/2 Cu Ft FireRocks Filler 20 LBS FireFines Filler, and illustrated instructions.

This burner design looks much better than the other burners you see.  Burns less fuel and you have to look close to tell the difference in the different widths we have available. 
INCLUDES: FireRocks & FireFines Filler Kit to economically expand the glass to a new 3D dimensional view.  This base has proven to use less fuel and spreads flames over a larger area.  No wasted gas burning under the surface because all the gas is forced to burn above the surface where you see it.

Looks Better and Fuel Bills Cost Less

INCLUDES: 20 lbs. of FireFines Filler which makes the flames spread out and look better!

This system makes sizing your fireplace easy - IT WORKS IN ALMOST ANY SMALLER SIZE FIREPLACE

Click Pictures to Enlarge

Place Burner In	Connect Gas Pipe (valve required if not using remote)	Place Volcanic Cinders FireRocks
Place FireGlass	Low in front High in back	This is the old way
This is the new 3D way!!	Dual-Flame powder coated burner STAINLESS STEEL VERSION AVAILABLE 18, 24, 30, and 36" Available	Triple-Xtra powder coated burner STAINLESS STEEL VERSION AVAILABLE 18, 24, 30, and 36" Available

EASY GLASS CALCULATOR HERE:  /glasscalc.php

The amount of glass depends on personal preference and desired flame appearance. General guidelines for covering a burner with 1 1/2" of glass when Lava Rock is used is shown below. Use glass on top of the lava rock to allow more oxygen to impact the flame.

NOTE: If no Lava Rock is used double the pounds of glass.

To find out exactly how much glass is needed for a fireplace: Multiply the front width (inches) x depth (inches) x fill level usually 3" to 4" inches of glass. Divide that total by 231 and then multiply by 12 to get your total glass in pounds

FIREPIT SIZE Pounds Needed: 

EASY GLASS CALCULATOR HERE:  /glasscalc.php

• A.  First measure across from the left to the right of your fireplace in the center.
• B. Then measure from the front to the back in the center.                                
• Multiply together then multiply times 2 times .06                                             
• A x B x 2 x .06 = Pounds of Glass Needed

Example:  27 x  13 x 2 x .06 = 42 Lbs. of Glass   

There are 19.25 cubic inches of glass per pound.  About 10 pounds per gallon.

Safety Pilot with or without Remote Control See Below YOU MUST USE THIS IF YOU HAVE PROPANE

Stainless Steel See Below

X-tra Flame Triple Burners See Below

All above burners work with Nat Gas or LP. They are not certified