NEW "Dancing FireGlass" Flame Spreading Conversion Kits
Use Your Existing Burner

INCLUDES:  FireFines Filler Kit to economically expand the glass AND intensify the color.  This base has proven to use less fuel and spreads flames over a larger area.  No wasted gas burning under the surface because all the gas is forced to burn above the surface where you see it.

Choose fireglass in the Accent Topping Fire Glass Category on the left. <<

Looks Better and Fuel Bills Cost Less

Place FireGlass	Low in front High in back	This is the old way
This is the new 3D way!!	INCLUDES:  Clear Fines (depends on topping color)	OR INCLUDES: Black Fines (depends on topping color)

 

EASY GLASS CALCULATOR HERE:  /glasscalc.php

The amount of glass depends on personal preference and desired flame appearance. General guidelines for covering a burner with 1 1/2" of glass when Lava Rock is used is shown below. Use glass on top of the lava rock to allow more oxygen to impact the flame.

NOTE: If no Lava Rock is used double the pounds of glass.

To find out exactly how much glass is needed for a fireplace: Multiply the front width (inches) x depth (inches) x fill level usually 3" to 4" inches of glass. Divide that total by 231 and then multiply by 12 to get your total glass in pounds

FIREPIT SIZE Pounds Needed: 

13" inside diameter 10 lbs
18" inside diameter 20 lbs
24" inside diameter 30lbs
30" inside diameter 60lbs
36" inside diameter 80lbs

EASY GLASS CALCULATOR HERE:  /glasscalc.php

• A.  First measure across from the left to the right of your fireplace in the center.
• B. Then measure from the front to the back in the center.                                
• Multiply together then multiply times 2 times .06                                             
• A x B x 2 x .06 = Pounds of Glass Needed

Example:  27 x  13 x 2 x .06 = 42 Lbs. of Glass   

There are 19.25 cubic inches of glass per pound.  About 10 pounds per gallon.